Before I get started, Like I've always said, I would do love if you to join our daily email readers to get updated with every single tweak we publish on this blog via email. To join simply Click Here, and also Like our fb page here to get updated.
How to setup the tweak on PC
Step 1: Firstly, go to PDProxy website and register, then download their zip file.
Step 2: After downloading the pdproxy zip file, then unzip and install. Then allow installation the Tap driver that you're prompted to install.
Step 3: Once the installation is completed, then select server (i.e Demo server 1 or 2), and select UDP as the protocol.
Step 4: Once the above procedure is completed, then go to settings >> advance settings >> proto option, then insert 53 as UDP port
Step 5: After the above setup, below parent proxy, tick on the "Enable Parent Proxy" box and enter 196.46.244.32 as the IP and 80 as the port.
Save and connect...
How to setup the tweak on PC
Step 1: Firstly, go to PDProxy website and register, then download their zip file.
Step 2: After downloading the pdproxy zip file, then unzip and install. Then allow installation the Tap driver that you're prompted to install.
Step 3: Once the installation is completed, then select server (i.e Demo server 1 or 2), and select UDP as the protocol.
Step 4: Once the above procedure is completed, then go to settings >> advance settings >> proto option, then insert 53 as UDP port
Step 5: After the above setup, below parent proxy, tick on the "Enable Parent Proxy" box and enter 196.46.244.32 as the IP and 80 as the port.
Save and connect...