HackGh Community Forum
Who Is Online?
Guests : 0
Hidden : 0
Registered : 0
Users Online :
Refresh View the whole list
HOW TO HACK AN ELECTRIC METRE(nigeria) Empty

Top posting users this month
Gand
HOW TO HACK AN ELECTRIC METRE(nigeria) Left11HOW TO HACK AN ELECTRIC METRE(nigeria) Mid10HOW TO HACK AN ELECTRIC METRE(nigeria) Right11 
seidu
HOW TO HACK AN ELECTRIC METRE(nigeria) Left11HOW TO HACK AN ELECTRIC METRE(nigeria) Mid10HOW TO HACK AN ELECTRIC METRE(nigeria) Right11 



Free counters!
Staff Online
Staff Online
Members2163
Most Online179
Newest Member
https://hackgh.forumotion.com/u2260

You are not connected. Please login or register

 » Hacking 101( Real HackGh Hacks ) » Hacking Tutorial (Redhat Content ) » 

HOW TO HACK AN ELECTRIC METRE(nigeria)

View previous topic View next topic Go down  Message [Page 1 of 1]

1HOW TO HACK AN ELECTRIC METRE(nigeria) Empty HOW TO HACK AN ELECTRIC METRE(nigeria) on Fri Dec 12, 2014 11:42 pm

MIMMS94

MIMMS94
Forum Hacker
Forum Hacker
Tested & Working for all Metre in Nigeria. So Our Accuracy is given as 100%.

-,-<ITEMS NEEDED>---
1)A screw Driver & Plier
2)safety gloves &- boots
3)Any Solid Metallic Wire

STEP 1: Put On Your Safety Gloves & Boot then switch
the Metre OFF from the switch at the right corner -
Now Unscrew the nuts from the Front Case Cover and
keep safely.

STEP 2: Now You'll see the arrangement of the metre "
counter device with buttons "- Now look carefully at
the TOP & BOTTOM of the Counter Device and you will
see some " Blueish-Plastic/attachment " Just Pull
them UP/DOWN ( that is->You should try to remove
the Metre Device "PULLING IT " )

STEP 3: Now after successfully pulling it Out. TAKE
NOTE:- Look at The Back of the Metre, You'll see "TWO
PAIR of FUSE ( 4 plugs )". Now Follow Next Step==>

STEP 4: Now Bring out your " Metallic Wire " ( it should
be the solid/strong type NOT the one with strands of
wire combined E.g <http://tinyurl.com/wire- sample> ) Now attach / Use the Wire to join the first pair of plug at the Back of the Counter Device and
push it to the end of the plug ( that is--> the wire
should be tied NOT at the top/base of the plug BUT at
the bottom of it- near the plastic case )plz note that
the wire must be tied at the first Pair of Plugs NOT the
second pair.

STEP 5: Now Push/put the Counter Device Back from
Where You pulled it then Cover the metre Back and
Screw back into Place- Now Your New "UB" HACKED
metre is Ready, Buy 500 recharge and use for
Forever [ But avoid overloading/appliances
connections ]

NOTE: THIS TUTORIAL IS POSTED BASE ON ALL METRE
CONFIGURATION- SO DONT OR ASK UN-RELEVANT
QUESTION, WISHING YOU ALL A HAPPY INTERCEPTING

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum