Home
Tested & Working for all Metre in Nigeria. So Our Accuracy is given as 100%.
-,-<ITEMS NEEDED>---
1)A screw Driver & Plier
2)safety gloves &- boots
3)Any Solid Metallic Wire
STEP 1: Put On Your Safety Gloves & Boot then switch
the Metre OFF from the switch at the right corner -
Now Unscrew the nuts from the Front Case Cover and
keep safely.
STEP 2: Now You'll see the arrangement of the metre "
counter device with buttons "- Now look carefully at
the TOP & BOTTOM of the Counter Device and you will
see some " Blueish-Plastic/attachment " Just Pull
them UP/DOWN ( that is->You should try to remove
the Metre Device "PULLING IT " )
STEP 3: Now after successfully pulling it Out. TAKE
NOTE:- Look at The Back of the Metre, You'll see "TWO
PAIR of FUSE ( 4 plugs )". Now Follow Next Step==>
STEP 4: Now Bring out your " Metallic Wire " ( it should
be the solid/strong type NOT the one with strands of
wire combined E.g <http://tinyurl.com/wire- sample> ) Now attach / Use the Wire to join the first pair of plug at the Back of the Counter Device and
push it to the end of the plug ( that is--> the wire
should be tied NOT at the top/base of the plug BUT at
the bottom of it- near the plastic case )plz note that
the wire must be tied at the first Pair of Plugs NOT the
second pair.
STEP 5: Now Push/put the Counter Device Back from
Where You pulled it then Cover the metre Back and
Screw back into Place- Now Your New "UB" HACKED
metre is Ready, Buy 500 recharge and use for
Forever [ But avoid overloading/appliances
connections ]
NOTE: THIS TUTORIAL IS POSTED BASE ON ALL METRE
CONFIGURATION- SO DONT OR ASK UN-RELEVANT
QUESTION, WISHING YOU ALL A HAPPY INTERCEPTING
-,-<ITEMS NEEDED>---
1)A screw Driver & Plier
2)safety gloves &- boots
3)Any Solid Metallic Wire
STEP 1: Put On Your Safety Gloves & Boot then switch
the Metre OFF from the switch at the right corner -
Now Unscrew the nuts from the Front Case Cover and
keep safely.
STEP 2: Now You'll see the arrangement of the metre "
counter device with buttons "- Now look carefully at
the TOP & BOTTOM of the Counter Device and you will
see some " Blueish-Plastic/attachment " Just Pull
them UP/DOWN ( that is->You should try to remove
the Metre Device "PULLING IT " )
STEP 3: Now after successfully pulling it Out. TAKE
NOTE:- Look at The Back of the Metre, You'll see "TWO
PAIR of FUSE ( 4 plugs )". Now Follow Next Step==>
STEP 4: Now Bring out your " Metallic Wire " ( it should
be the solid/strong type NOT the one with strands of
wire combined E.g <http://tinyurl.com/wire- sample> ) Now attach / Use the Wire to join the first pair of plug at the Back of the Counter Device and
push it to the end of the plug ( that is--> the wire
should be tied NOT at the top/base of the plug BUT at
the bottom of it- near the plastic case )plz note that
the wire must be tied at the first Pair of Plugs NOT the
second pair.
STEP 5: Now Push/put the Counter Device Back from
Where You pulled it then Cover the metre Back and
Screw back into Place- Now Your New "UB" HACKED
metre is Ready, Buy 500 recharge and use for
Forever [ But avoid overloading/appliances
connections ]
NOTE: THIS TUTORIAL IS POSTED BASE ON ALL METRE
CONFIGURATION- SO DONT OR ASK UN-RELEVANT
QUESTION, WISHING YOU ALL A HAPPY INTERCEPTING