First topic message reminder :
You need the following hardware to make it work.
Hardware Needed
1. A Decoder ( GoTV, My Tv, DSTV )
2. A splitter.
3. Rj Cable 45
4. Coaxial Cable.
5. CABLE MODERM.
Direction of Configuration
STEP ONE
Connect your coaxial cable (that comes) from your Satellite dish to your Splitter. Your Splitter should be the type that has one “IN” port and two “OUT” port. The function of the Splitter is to split the signal from the Satellite Dish into two. One for your Cable TV, and other for internet access.
STEP TWO
Connect the other coaxial cable from the first “OUT” port of the Splitter to the normal “IN” port of your decoder for the satellite TV signal. Then connect another coaxial cable from the decoder to your TV.
STEP THREE
Now connect another coaxial cable from the second “OUT” port of your splitter to your Cable modem ( Linksys cable modem). Note: It must be a Linksys Cable Modem if you don’t want to pay extra charges for your access to the net. With Linksys Cable Modem you only pay for your normal Satellite TV subscription.
STEP FOUR
This is where you will make use of RJ 45 Ethernet Cable. Connect the RJ 45 Ethernet cable from the Linksys Cable modem to your Switch or Hub. Which implies that you want to connect two or more computer system. Then connect your computers with Ethernet RJ 45 cable to the switch. But if its only one computer system just connects it direct to the cable modem with the Ethernet cable (no need of Switch or Hub). And of course if the cable modem is the wireless type, you can connect your system through Wi Fi provided your computer has it.
STEP FIVE
System configuration…
1. Start up your desktop computer or Laptop depending on the type you are using.
2. Click on the Start menu.
3. A dialogue box will appear with a lot of option to click, locate Control Panel and click on it.
4. Locate Network Connection and click on it.
5. Now locate Create a new network and click on it.
6. This will take you to another environment, locate Connect to Internet Radio and click on it. After that, click on the Next button and this should lead you to another area then click Finish.
At this your system is now configured to surf the net with an amazing speed. Just imagine using the same signal that transmit video signal, you can really imagine the speed of internet access. Happy surfing.
its free using normal decoders like multi tv etc
Last edited by ahmedo1992 on Wed Jul 16, 2014 8:38 pm; edited 2 times in total